Kristina Edström
Professor at Institutionen för kemi - Ångström; Strukturkemi
- Telephone:
- +46 18 471 37 13
- Mobile phone:
- +46 70 167 90 06
- Fax:
- +46 18 51 35 48
- E-mail:
- Kristina.Edstrom@kemi.uu.se
- Visiting address:
- Lägerhyddsvägen 1
- Postal address:
- Box 538
751 21 Uppsala
Download contact information for Kristina Edström at Institutionen för kemi - Ångström; Strukturkemi
More information is available to staff who log in.
Keywords
- batterier
- batteries
- batteriforskning
- battery
- battery 2030
- battery research
- battery2030
- forskningsinfrastruktur
- infrastruktur
Publications
Selection of publications
- Towards more sustainable negative electrodes in Na-ion batteries via nanostructured iron oxide (2014)
- Emulsion-templated bicontinuous carbon network electrodes for use in 3D microstructured batteries (2013)
- The influence of PMS-additive on the electrode/electrolyte interfaces in LiFePO4/graphite Li-ion batteries (2013)
- Corrosion Resistances and Passivation of Powder Metallurgical and Conventionally Cast 316L and 2205 Stainless Steels (2013)
- Cation profiling of passive films on stainless steel formed in sulphuric and acetic acid by deconvolution of angle-resolved X-ray photoelectron spectra (2013)
- Comparing aging of graphite/LiFePO4 cells at 22 degrees C and 55 degrees C - Electrochemical and photoelectron spectroscopy studies (2013)
- Why PEO as a binder or polymer coating increases capacity in the Li-S system (2013)
- Intercalation and conversion reactions in Ni0.5TiOPO4 Li-ion battery anode materials (2013)
- Comparing anode and cathode electrode/electrolyte interface composition and morphology using soft and hard X-ray photoelectron spectroscopy (2013)
- Consequences of air exposure on the lithiated graphite SEI (2013)
- Role of the LiPF6 Salt for the Long-Term Stability of Silicon Electrodes in Li-Ion Batteries (2013)
- Improved performances of nanosilicon electrodes using the salt LiFSI (2013)
- Improving the electrochemical performance of organic Li-ion battery electrodes (2013)
- Design of a new lithium ion battery test cell for in-situ neutron diffraction measurements (2013)
- Understanding and Controlling the Surface Chemistry of LiFeSO4F for an Enhanced Cathode Functionality (2013)
- Electrochemical elaboration of electrodes and electrolytes for 3D structured batteries (2013)
- High energy and power density TiO2 nanotube electrodes for 3D Li-ion microbatteries (2013)
- Li-O2 Battery Degradation by Lithium Peroxide (Li2O2) (2013)
- Surface Characterization of the Carbon Cathode and the Lithium Anode of Li-O2 Batteries using LiClO4 or LiBOB salts (2013)
- The SEI Layer Formed on Lithium Metal in the Presence of Oxygen (2013)
- Electrochemical behavior of LiNi1-y-zCoyMnzO2 probed through structural and magnetic properties (2012)
- Electrochemical lithium ion intercalation in Li 0.5Ni 0.25TiOPO 4 examined by in situ X-ray diffraction (2012)
- XPS study of duplex stainless steel as a possible current collector in a Li-ion battery (2012)
- Full depth profile of passive films on 316L stainless steel based on high resolution HAXPES in combination with ARXPS (2012)
- Origin of the irreversible capacity of the Fe0.5TiOPO4 anode material (2012)
- Nanosilicon Electrodes for Lithium-Ion Batteries (2012)
- Degradation Products on Li-Negative Electrode and the Carbon Cathode in Li-O2 Batteries (2012)
- Ether Based Electrolyte, LiB(CN)4 Salt and Binder Degradation in the Li-O2 Battery Studied by Hard X-ray Photoelectron Spectroscopy (HAXPES) (2012)
- The Cathode Surface Composition of a Cycled Li–O2 Battery (2012)
- 3D lithium ion batteries-from fundamentals to fabrication (2011)
Recent publications
- Li7La3Zr2O12 interface functionalization via boric acid treatment (2024)
- Reversible Hydration Enabling High-Rate Aqueous Li-Ion Batteries (2024)
- BATTERY 2030+ and its Research Roadmap (2023)
- Metal-Ion Intercalation Mechanisms in Vanadium Pentoxide and Its New Perspectives (2023)
- Charting the course to solid-state dual-ion batteries (2023)
All publications
Articles
- Li7La3Zr2O12 interface functionalization via boric acid treatment (2024)
- Reversible Hydration Enabling High-Rate Aqueous Li-Ion Batteries (2024)
- BATTERY 2030+ and its Research Roadmap (2023)
- Metal-Ion Intercalation Mechanisms in Vanadium Pentoxide and Its New Perspectives (2023)
- Charting the course to solid-state dual-ion batteries (2023)
- Ionic transport in solid-state composite poly(trimethylene carbonate)-Li6.7Al0.3La3Zr2O12 electrolytes (2023)
- Interfacial phenomena in lithium batteries and beyond (2023)
- Development of P2 or P2/P3 cathode materials for sodium-ion batteries by controlling the Ni and Mn contents in Na0.7CoxMnyNizO2 layered oxide (2023)
- Photovoltaic Wafering Silicon Kerf Loss as Raw Material (2023)
- Interfacial Chemistry in Aqueous Lithium‐Ion Batteries (2023)
- Evaluating electrolyte additives in dual-ion batteries (2023)
- Impact of Binders on Self-Discharge in Graphite Dual-Ion Batteries (2023)
- Surface, Structural, and Electrochemical Analysis of High-Voltage Spinel Cathode LiNi0.5Mn1.5O4 Evolution Upon Ambient Storage Conditions (2023)
- Robotised screening and characterisation for accelerated discovery of novel Lithium-ion battery electrolytes (2023)
- Automated electrolyte formulation and coin cell assembly for high-throughput lithium-ion battery research (2023)
- Concentrated LiFSI-Ethylene Carbonate Electrolytes and Their Compatibility with High-Capacity and High-Voltage Electrodes (2022)
- Understanding Battery Interfaces by Combined Characterization and Simulation Approaches (2022)
- Accelerating Battery Characterization Using Neutron and Synchrotron Techniques (2022)
- Editorial to the Special Issue (2022)
- Rechargeable Batteries of the Future-The State of the Art from a BATTERY 2030+Perspective (2022)
- Anionic Redox and Electrochemical Kinetics of the Na2Mn3O7 Cathode Material for Sodium-Ion Batteries (2022)
- On the Use of Ti3C2Tx MXene as a Negative Electrode Material for Lithium-Ion Batteries (2022)
- Ternary Ionogel Electrolytes Enable Quasi-Solid-State Potassium Dual-Ion Intercalation Batteries (2022)
- Advances in studying interfacial reactions in rechargeable batteries by photoelectron spectroscopy (2022)
- Face to Face at the Cathode Electrolyte Interphase (2022)
- Synthesis-structure relationships in Li- and Mn-rich layered oxides (2022)
- Perspectives on Iron Oxide-Based Materials with Carbon as Anodes for Li- and K-Ion Batteries (2022)
- Reactivity of TiS2 Anode towards Electrolytes in Aqueous Li‐ion Batteries (2022)
- Future Material Developments for Electric Vehicle Battery Cells Answering Growing Demands from an End-User Perspective (2021)
- A Lignosulfonate Binder for Hard Carbon Anodes in Sodium-Ion Batteries (2021)
- Nature of the Cathode–Electrolyte Interface in Highly Concentrated Electrolytes Used in Graphite Dual-Ion Batteries (2021)
- Probing Electrochemical Potential Differences over the Solid/Liquid Interface in Li-Ion Battery Model Systems. (2021)
- Synthetic Pathway Determines the Nonequilibrium Crystallography of Li- and Mn-Rich Layered Oxide Cathode Materials (2021)
- Garnet-Poly(epsilon-caprolactone-co-trimethylene carbonate) Polymer-in-Ceramic Composite Electrolyte for All-Solid-State Lithium-Ion Batteries (2021)
- Toward Better and Smarter Batteries by Combining AI with Multisensory and Self-Healing Approaches (2021)
- How Mn/Ni Ordering Controls Electrochemical Performance in High-Voltage Spinel LiNi0.44Mn1.56O4 with Fixed Oxygen Content (2020)
- Micro versus Nano (2020)
- Lithium-ion batteries (2020)
- Sulfolane-Based Ethylene Carbonate-Free Electrolytes for LiNi0.6Mn0.2Co0.2O2-Li4Ti5O12 Batteries (2020)
- Understanding the redox process upon electrochemical cycling of the P2-Na0.78Co1/2Mn1/3Ni1/6O2 electrode material for sodium-ion batteries (2020)
- Elimination of Fluorination (2020)
- Catalytically graphitized freestanding carbon foams for 3D Li-ion microbatteries (2020)
- Influence of Electrolyte Additives on the Degradation of Li2VO2F Li-Rich Cathodes (2020)
- Understanding the Roles of Tris(trimethylsilyl) Phosphite (TMSPi) in LiNi0.8Mn0.1Co0.1O2 (NMC811)/Silicon-Graphite (Si-Gr) Lithium-Ion Batteries (2020)
- Influence of Synthesis Routes on the Crystallography, Morphology, and Electrochemistry of Li2MnO3 (2020)
- Direct Operando Observation of Double Layer Charging and Early Solid Electrolyte Interphase Formation in Li-Ion Battery Electrolytes (2020)
- Stabilization of Li-Rich Disordered Rocksalt Oxyfluoride Cathodes by Particle Surface Modification (2020)
- Highly Concentrated LiTFSI-EC Electrolytes for Lithium Metal Batteries (2020)
- Solid Electrolyte Interphase (SEI) Formation on the Graphite Anode in Electrolytes Containing the Anion Receptor Tris(hexafluoroisopropyl)borate (THFIPB) (2020)
- Cation Ordering and Oxygen Release in LiNi0.5-xMn1.5+xO4-y (LNMO) (2019)
- Tailoring the Microstructure and Electrochemical Performance of 3D Microbattery Electrodes Based on Carbon Foams (2019)
- Improved cycling stability in high-capacity Li-rich vanadium containing disordered rock salt oxyfluoride cathodes (2019)
- Investigation of dimethyl carbonate and propylene carbonate mixtures for LiNi0.6Mn0.2Co0.2O2-Li4Ti5O12 cells (2019)
- Temperature dependence of electrochemical degradation in LiNi1/3Mn1/3Co1/3O2/Li4Ti5O12 cells (2019)
- Molybdenum Oxide Nanosheets with Tunable Plasmonic Resonance (2019)
- Degradation Mechanisms in Li2VO2F Li-Rich Disordered Rock-Salt Cathodes (2019)
- On the Capacity Losses Seen for Optimized Nano-Si Composite Electrodes in Li-Metal Half-Cells (2019)
- Challenges and development of composite solid-state electrolytes for high-performance lithium ion batteries (2019)
- Probing a battery electrolyte drop with ambient pressure photoelectron spectroscopy (2019)
- Efficient BiVO4 Photoanodes by Postsynthetic Treatment (2019)
- Fast-charging effects on ageing for energy-optimized automotive LiNi1/3Mn1/3Co1/3O2/graphite prismatic lithium-ion cells (2019)
- Depth-dependent oxygen redox activity in lithium-rich layered oxide cathodes (2019)
- Sandwich-structured nano/micro fiber-based separators for lithium metal batteries (2019)
- Double-sided conductive separators for lithium-metal batteries (2019)
- Polydopamine-based redox-active separators for lithium-ion batteries (2019)
- Challenges and perspectives for new material solutions in batteries (2019)
- Surface activated polyethylene separator promoting Li+ ion transport in gel polymer electrolytes and cycling stability of Li-metal anode (2019)
- Manganese Hexacyanomanganate as a Positive Electrode for Nonaqueous Li-, Na-, and K-Ion Batteries (2019)
- Neutron Pair Distribution Function Study of FePO4 and LiFePO4 (2019)
- Redox-State-Dependent Interplay between Pendant Group and Conducting Polymer Backbone in Quinone-Based Conducting Redox Polymers for Lithium Ion Batteries (2019)
- Unraveling and Mitigating the Storage Instability of Fluoroethylene Carbonate-Containing LiPF6 Electrolytes To Stabilize Lithium Metal Anodes for High-Temperature Rechargeable Batteries (2019)
- Understanding the Capacity Loss in LiNi0.5Mn1.5O4-Li4Ti5O12 Lithium-Ion Cells at Ambient and Elevated Temperatures (2018)
- Influence of state-of-charge in commercial LiNi0.33Mn0.33Co0.33O2/LiMn2O4-graphite cells analyzed by synchrotron-based photoelectron spectroscopy (2018)
- On the P2-NaxCo1−y(Mn2/3Ni1/3)yO2 Cathode Materials for Sodium-Ion Batteries (2018)
- Interfaces in Li-ion and Na-ion batteries - what more do we need to understand? (2018)
- State of the art knowledge about interfaces and interphases in lithium and sodium batteries (2018)
- Towards high-voltage Li-ion batteries (2018)
- Solid Electrolyte Interphase (SEI) of Water-Processed Graphite Electrodes Examined in a 65 mAh Full Cell Configuration (2018)
- A free standing Ru–TiC nanowire array/carbon textile cathode with enhanced stability for Li–O2 batteries (2018)
- Multiscale Interfacial Strategy to Engineer Mixed Metal-Oxide Anodes toward Enhanced Cycling Efficiency (2018)
- Critical evaluation of the stability of highly concentrated LiTFSI - Acetonitrile electrolytes vs. graphite, lithium metal and LiFePO4 electrodes (2018)
- Towards Li-ion batteries operating at 80 °C: Ionic liquid versus conventional liquid electrolytes (2018)
- Nanocellulose Modified Polyethylene Separators for Lithium Metal Batteries (2018)
- Lithium trapping in microbatteries based on lithium- and Cu2O-coated copper nanorods (2018)
- Manganese Pyrosilicates as Novel Positive Electrode Materials for Na-Ion Batteries (2018)
- Towards Solid-State 3D-Microbatteries using Functionalized Polycarbonate-based Polymer Electrolytes (2018)
- Pseudocapacitive charge storage properties of Na2/3Co2/3Mn2/9Ni1/9O2 in Na-ion batteries (2018)
- Conducting Polymer Paper-Derived Mesoporous 3D N-doped Carbon Current Collectors for Na and Li Metal Anodes (2018)
- Redox-Active Separators for Lithium-Ion Batteries (2018)
- Nanocellulose Structured Paper-Based Lithium Metal Batteries (2018)
- Conducting polymer paper-derived separators for lithium metal batteries (2018)
- Lightweight, Thin, and Flexible Silver Nanopaper Electrodes for High-Capacity Dendrite-Free Sodium Metal Anodes (2018)
- Size-dependent Electrochemical Performance of Monolithic Anatase TiO2 Nanotube Anodes for Sodium-ion Batteries (2018)
- The Role of LiTDI Additive in LiNi1/3Mn1/3Co1/3O2/ Graphite Lithium-Ion Batteries at Elevated Temperatures (2018)
- The Effect of the Fluoroethylene Carbonate Additive in LiNi0.5Mn1.5O4 - Li4Ti5O12 Lithium-Ion Cells (2017)
- Over-Stoichiometric NbO2 Nanoparticles for a High Energy and Power Density Lithium Microbattery (2017)
- How the Negative Electrode Influences Interfacial and Electrochemical Properties of LiNi1/3Co1/3Mn1/3O2 Cathodes in Li-Ion Batteries (2017)
- Overlapping and rate controlling electrochemical reactions for tin(IV) oxide electrodes in lithiu-ion batteries (2017)
- Elevated Temperature Lithium-Ion Batteries Containing SnO2 Electrodes and LiTFSI-Pip14TFSI Ionic Liquid Electrolyte (2017)
- Photoelectron Spectroscopic Evidence for Overlapping Redox Reactions for SnO2 Electrodes in Lithium-Ion Batteries (2017)
- Oxygen redox reactions in Li ion battery electrodes studied by resonant inelastic X-ray scattering (2017)
- In operando neutron diffraction studies of battery materials (2017)
- A Water Based Synthesis of Ultrathin Hydrated Vanadium Pentoxide Nanosheets for Lithium Battery Application (2017)
- Adiponitrile-Lithium Bis(trimethylsulfonyl)imide Solutions as Alkyl Carbonate-free Electrolytes for Li4Ti5O12 (LTO)/LiNi1/3Co1/3Mn1/3O2 (NMC) Li-Ion Batteries (2017)
- On the Electrochemical Properties and Interphase Composition of Graphite (2017)
- Breaking Down a Complex System (2017)
- Towards an Understanding of Li2O2 Evolution in Li-O2 Batteries (2017)
- Highly efficient Ru/MnO2 nano-catalysts for Li-O2 batteries (2017)
- Surface Layer Evolution on Graphite During Electrochemical Sodium-tetraglyme Co-intercalation (2017)
- Different Shades of Li4Ti5O12 Composites (2017)
- Thickness difference induced pore structure variations in cellulosic separators for lithium-ion batteries (2017)
- Controlled crystal growth orientation and surface charge effects in self-assembled nickel oxide nanoflakes and their activity for the oxygen evolution reaction (2017)
- Lithium trapping in alloy forming electrodes and current collectors for lithium based batteries (2017)
- Dilithium 2-aminoterephthalate as a negative electrode material for lithium-ion batteries (2017)
- Investigation of the Structural and Electrochemical Properties of Mn2Sb3O6CI upon Reaction with Li Ions (2017)
- Modelling the morphological background to capacity fade in Si-based lithium-ion batteries (2017)
- Iron-Based Electrodes Meet Water-Based Preparation, Fluorine-Free Electrolyte and Binder (2017)
- Redox-active Separators for High-capacity Lithium-ion Batteries (2017)
- LiTDI (2017)
- Boosting the thermal stability of emulsion–templated polymers via sulfonation (2016)
- A large format in operando wound cell for analysing the structural dynamics of lithium insertion materials (2016)
- Passivation Layer and Cathodic Redox Reactions in Sodium-Ion Batteries Probed by HAXPES (2016)
- A one-step water based strategy for synthesizing hydrated vanadium pentoxide nanosheets from VO2(B) as free-standing electrodes for lithium battery applications (2016)
- Influence of inactive electrode components on degradation phenomena in nano-Si electrodes for Li-ion batteries (2016)
- The Li-S battery (2016)
- Electrochemical characterizations of Co0.5TiOPO4 as anode material for lithium-ion batteries (2016)
- A hard X-ray photoelectron spectroscopy study on the solid electrolyte interphase of a lithium 4,5-dicyano-2-(trifluoromethyl)imidazolide based electrolyte for Si-electrodes (2016)
- SEI Formation and Interfacial Stability of a Si Electrode in a LiTDI-Salt Based Electrolyte with FEC and VC Additives for Li-Ion Batteries (2016)
- 3-D binder-free graphene foam as cathode for high capacity Li-O2 batteries (2016)
- Charge-compensation in 3d-transition-metal-oxide intercalation cathodes through the generation of localized electron holes on oxygen (2016)
- Encasing Si particles within a versatile TiO2−xFx layer as an extremely reversible anode for high energy-density lithium-ion battery (2016)
- Constraining Si Particles within Graphene Foam Monolith (2016)
- Electric potential gradient at the buried interface between Lithium-ion battery electrodes and the SEI observed using photoelectron spectroscopy (2016)
- Manganese in the SEI layer of Li4Ti5O12 studied using combined NEXAFS and HAXPES techniques (2016)
- Manganese in the SEI Layer of Li4Ti5O12 Studied by Combined NEXAFS and HAXPES Techniques (2016)
- Manganese in the SEI Layer of Li 4Ti5O12 Studied by Combined NEXAFS and HAXPES Techniques (2016)
- Mesoporous Cladophora cellulose separators for lithium-ion batteries (2016)
- Photoelectron Spectroscopy for Lithium Battery Interface Studies (2016)
- Superlithiation of Organic Electrode Materials (2016)
- Ni3Sb4O6F6 and Its Electrochemical Behavior toward Lithium-A Combination of Conversion and Alloying Reactions (2016)
- Insight into the processes controlling the electrochemical reactions of nanostructured iron oxide electrodes in Li- and Na-half cells (2016)
- Compatibility of microwave plasma chemical vapor deposition manufactured Si/C electrodes with new LiTDI-based electrolytes (2016)
- On the electrochemistry of tin oxide coated tin electrodes in lithium-ion batteries (2015)
- Mechanisms and Performances of Na1.5Fe0.5Ti1.5(PO4)(3)/C Composite as Electrode Material for Na-Ion Batteries (2015)
- Electronic and Structural Changes in Ni0.5TiOPO4 Li-ion Battery Cells Upon First Lithiation and Delithiation, Studied by High-Energy X-ray Spectroscopies (2015)
- Formation of Tavorite-Type LiFeSO4F Followed by In Situ X-ray Diffraction (2015)
- A stable graphite negative electrode for the lithium-sulfur battery (2015)
- Visualising the problems with balancing lithium-sulfur batteries by "mapping'' internal resistance (2015)
- An Organic Catalyst for Li-O-2 Batteries (2015)
- Electrochemical Interfaces in Electrochemical Energy Storage Systems (2015)
- Three-dimensional carbon foam supported tin oxide nanocrystallites with tunable size range (2015)
- Three-dimensional carbon foam supported tin oxide nanocrystallites with tunable size range (2015)
- A General Method to Fabricate Free-Standing Electrodes (2015)
- Recycled Poly(vinyl alcohol) Sponge for Carbon Encapsulation of Size-Tunable Tin Dioxide Nanocrystalline Composites (2015)
- Iron Doping in Spinel NiMn2O4 (2015)
- A high pressure x-ray photoelectron spectroscopy experimental method for characterization of solid-liquid interfaces demonstrated with a Li-ion battery system (2015)
- Depth profiling the solid electrolyte interpahase on lithium titanate (Li4Ti5O12) using synchrotron-based photoelectron spectroscopy (2015)
- Depth profiling the solid electrolyte interphase on lithium titanate (Li4Ti5O12) using synchrotron-based photoelectron spectroscopy (2015)
- Flash Joule heating for ductilization of metallic glasses (2015)
- Electrochemical fabrication and characterization of Cu/Cu2O multi-layered micro and nanorods in Li-ion batteries (2015)
- Hierarchical self-assembled structures based on nitrogen-doped carbon nanotubes as advanced negative electrodes for Li-ion batteries and 3D microbatteries (2015)
- Reduced graphene oxide for Li-air batteries (2015)
- Realization of high performance polycarbonate-based Li polymer batteries (2015)
- At the polymer electrolyte interfaces (2015)
- Flexible freestanding Cladophora nanocellulose paper based Si anodes for lithium-ion batteries (2015)
- Conducting Polymer Paper-Based Cathodes for High-Areal-Capacity Lithium–Organic Batteries (2015)
- Improved Performance of the Silicon Anode for Li-Ion Batteries (2015)
- Analysis of the Interphase on Carbon Black Formed in High Voltage Batteries (2015)
- Lithium salts for advanced lithium batteries: Li-metal, Li-O2, and Li-S (2015)
- Nanosized LiFePO4-decorated emulsion-templated carbon foam for 3D micro batteries (2014)
- New in-situ neutron diffraction cell for electrode materials (2014)
- Aging of electrode/electrolyte interfaces in LiFePO4/graphite cells cycled with and without PMS additive (2014)
- Impact of the flame retardant additive triphenyl phosphate (TPP) on the performance of graphite/LiFePO4 cells in high power applications (2014)
- The Buried Carbon/Solid Electrolyte Interphase in Li-ion Batteries Studied by Hard X-ray Photoelectron Spectroscopy (2014)
- Synthesis and characterization of a new layered cathode material for sodium ion batteries (2014)
- A versatile photoelectron spectrometer for pressures up to 30 mbar (2014)
- Non-uniform aging of cycled commercial LiFePO4//graphite cylindrical cells revealed by post-mortem analysis (2014)
- X-ray absorption spectroscopy and resonant inelastic scattering study of the first lithiation cycle of the Li-ion battery cathodeLi(2-x)MnSiO4 (2014)
- X-ray absorption spectroscopy and resonant inelastic scattering study of the first lithiation cycle of the Li-ion battery cathode Li-2-xMnSiO4 (2014)
- Analysis of soluble intermediates in the lithium-sulfur battery by a simple in situ electrochemical probe (2014)
- Functional, water-soluble binders for improved capacity and stability of lithium-sulfur batteries (2014)
- Porosity Blocking in Highly Porous Carbon Black by PVdF Binder and Its Implications for the Li-S System (2014)
- Pt/α-MnO2 nanotube (2014)
- Influence of deposition temperature and amorphous carbon on microstructure and oxidation resistance of magnetron sputtered nanocomposite Cr-C films (2014)
- A Li-Ion Microbattery with 3D Electrodes of Different Geometries (2014)
- On the origin of the capacity fading for aluminium negative electrodes in Li-ion batteries (2014)
- On the electrophoretic and sol-gel deposition of active materials on aluminium rod current collectors for three-dimensional Li-ion micro-batteries (2014)
- MnSn2 electrodes for Li-ion batteries (2014)
- Investigation of the Electrode/Electrolyte Interface of Fe2O3 Composite Electrodes (2014)
- Electrodeposition of Vanadium Oxide/Manganese Oxide Hybrid Thin Films on Nanostructured Aluminum Substrates (2014)
- Environmentally-Friendly Lithium Recycling From a Spent Organic Li-Ion Battery (2014)
- Stability of organic Na-ion battery electrode materials (2014)
- Increased Cycling Efficiency of Lithium Anodes in Dimethyl Sulfoxide Electrolytes For Use in Li-O-2 Batteries (2014)
- A Mössbauer spectroscopy study of polyol synthesized tavorite LiFeSO4F. (2014)
- Identification of an Intermediate Phase, Li1/2FeSO4F, Formed during Electrochemical Cycling of Tavorite LiFeSO4F (2014)
- Polycarbonate-based solid polymer electrolytes for Li-ion batteries (2014)
- Towards more sustainable negative electrodes in Na-ion batteries via nanostructured iron oxide (2014)
- The impact of size effects on the electrochemical behaviour of Cu2O-coated Cu nanopillars for advanced Li-ion microbatteries (2014)
- Interface layer formation in solid polymer electrolyte lithium batteries (2014)
- Influence of annealing temperature on the electrochemical and surface properties of the 5-V spinel cathode material LiCr0.2Ni0.4Mn1.4O4 synthesized by a sol–gel technique (2014)
- Emulsion-templated bicontinuous carbon network electrodes for use in 3D microstructured batteries (2013)
- The influence of PMS-additive on the electrode/electrolyte interfaces in LiFePO4/graphite Li-ion batteries (2013)
- Corrosion Resistances and Passivation of Powder Metallurgical and Conventionally Cast 316L and 2205 Stainless Steels (2013)
- Cation profiling of passive films on stainless steel formed in sulphuric and acetic acid by deconvolution of angle-resolved X-ray photoelectron spectra (2013)
- Comparing aging of graphite/LiFePO4 cells at 22 degrees C and 55 degrees C - Electrochemical and photoelectron spectroscopy studies (2013)
- Why PEO as a binder or polymer coating increases capacity in the Li-S system (2013)
- Intercalation and conversion reactions in Ni0.5TiOPO4 Li-ion battery anode materials (2013)
- Accelerated Electrochemical Decomposition of Li2O2 under X-ray Illumination (2013)
- Comparing anode and cathode electrode/electrolyte interface composition and morphology using soft and hard X-ray photoelectron spectroscopy (2013)
- Consequences of Air Exposure on the Lithiated Graphite SEI (2013)
- Consequences of air exposure on the lithiated graphite SEI (2013)
- Role of the LiPF6 Salt for the Long-Term Stability of Silicon Electrodes in Li-Ion Batteries (2013)
- Improved performances of nanosilicon electrodes using the salt LiFSI (2013)
- Improving the electrochemical performance of organic Li-ion battery electrodes (2013)
- Design of a new lithium ion battery test cell for in-situ neutron diffraction measurements (2013)
- Understanding and Controlling the Surface Chemistry of LiFeSO4F for an Enhanced Cathode Functionality (2013)
- Electrochemical elaboration of electrodes and electrolytes for 3D structured batteries (2013)
- High energy and power density TiO2 nanotube electrodes for 3D Li-ion microbatteries (2013)
- Li-O2 Battery Degradation by Lithium Peroxide (Li2O2) (2013)
- Surface Characterization of the Carbon Cathode and the Lithium Anode of Li-O2 Batteries using LiClO4 or LiBOB salts (2013)
- The SEI Layer Formed on Lithium Metal in the Presence of Oxygen (2013)
- Electrochemical behavior of LiNi1-y-zCoyMnzO2 probed through structural and magnetic properties (2012)
- Electrochemical lithium ion intercalation in Li 0.5Ni 0.25TiOPO 4 examined by in situ X-ray diffraction (2012)
- XPS study of duplex stainless steel as a possible current collector in a Li-ion battery (2012)
- Full depth profile of passive films on 316L stainless steel based on high resolution HAXPES in combination with ARXPS (2012)
- Origin of the irreversible capacity of the Fe0.5TiOPO4 anode material (2012)
- Nanosilicon Electrodes for Lithium-Ion Batteries (2012)
- Ether Based Electrolyte, LiB(CN)4 Salt and Binder Degradation in the Li-O2 Battery Studied by Hard X-ray Photoelectron Spectroscopy (HAXPES) (2012)
- The Cathode Surface Composition of a Cycled Li–O2 Battery (2012)
- Effect of manganese on the structural and thermal stability of Li 0.3Ni0.7 - yCo0.3−yMn2yO2 electrode materials (y =0 and 0.05) (2011)
- Electrodeposition as a Tool for 3D Microbattery Fabrication (2011)
- Resonant inelastic X-ray scattering and X-ray absorption spectroscopy on the negative electrode material Li0.5Ni0.25TiOPO4 in a Li-ion battery (2011)
- Resonant inelastic X-ray scattering and X-ray absorption spectroscopy on the cathode materials LiMnPO4 and LiMn0.9Fe0.1PO4 (2011)
- Resonant inelastic X-ray scattering and X-ray absorption spectroscopy on the negative electrode material Li0.5Ni0.25TiOPO4 in a Li-ion battery (2011)
- The electrochemical behaviour of the carbon-coated Ni0.5TiOPO4 electrode material (2011)
- Quantifying the Metal Nickel Enrichment on Stainless Steel (2011)
- Galvanostatic electrodeposition of aluminium nano-rods for Li-ion three-dimensional micro-battery current collectors (2011)
- 3D lithium ion batteries-from fundamentals to fabrication (2011)
- Influence of the Cathode Porosity on the Discharge Performance of the Lithium-Oxygen Battery (2011)
- XPS analysis of manganese in stainless steel passive films on 1.4432 and the lean duplex 1.4162 (2010)
- Resonant Soft X-Ray Emission Spectroscopy and X-Ray Absorption Spectroscopy on the Cathode Material LiNi0.65Co0.25Mn0.1O2 (2010)
- Resonant Soft X-Ray Emission Spectroscopy and X-Ray Absorption Spectroscopy on the Cathode Material LiNi0.65Co0.25Mn0.1O2 (2010)
- Nondestructive Depth Profiling of the Solid Electrolyte Interphase on LiFePO4 and Graphite Electrodes (2010)
- Electrodeposited Cu2Sb as anode material for 3-dimensional Li-ion microbatteries (2010)
- Effect of ethanol-assisted electrode fabrication on the performance of silicon anodes (2010)
- Dimensionality crossover and frustrated spin dynamics on a triangular lattice (2010)
- Magnetic order, aging, and spin frustration in a percolating spin system, LiNi0.8Co0.1Mn0.1O2 (2010)
- The Effect of Pore Size on the Performance of the Li-O2 Battery (2010)
- Self-Supported Three-Dimensional Nanoelectrodes for Microbattery Applications (2009)
- A delithiated LiNi0.65Co0.25Mn0.10O2 electrode material (2009)
- Synthesis and characterization of carbon-coated Li0.5Ni0.25TiOPO4 anode material (2009)
- Thin films of Cu2Sb and Cu9Sb2 as anode materials in Li-ion batteries (2008)
- Direct electrodeposition of aluminium nano-rods (2008)
- Effect of the synthesis temperature on the structure and electrochemical behaviour of the LiNi0.65Co0.25Mn0.1O2 positive electrode material (2008)
- Bologna and beyond (2008)
- Electrodeposition and electrochemical characterisation of thick and thin coatings of Sb and Sb/Sb2O3 particles for Li-ion battery anodes (2007)
- Electrodeposited Sb and Sb/Sb2O3 nanoparticle coatings as anode materials for Li-ion batteries (2007)
- How dynamic is the SEI? (2007)
- Recent findings and prospects in the field of pure metals as negative electrodes for Li-ion batteries (2007)
- Influence of electrode microstructure on the reactivity of Cu2Sb with lithium (2007)
- Surface chemistry of intermetallic AlSb-anodes for Li-ion batteries (2007)
- Studies of layered lithium metal oxide anodes in lithium cells (2007)
- A new look at the solid electrolyte interphase on graphite anodes in Li-ion batteries (2006)
- Structural transformations in lithiated Mn2Sb electrodes probed by Mossbauer spectroscopy and X-ray diffraction (2006)
- Lithium Insertion into Vanadium Oxide Nanotubes: Electrochemical and Structural Aspects (2006)
- Solid electrolyte interphase on graphite Li-ion battery anodes studied by soft X-ray spectroscopy (2004)
- The cathode-electrolyte interface in the Li-ion battery (2004)
- Characterisation of the SEI formed on natural graphite in PC-based electrolytes (2004)
- Characterisation of the SEI formed on natural graphite in PC-based electrolytes (2004)
- Electrolyte additives for enhanced thermal stability of the graphite anode interface in a Li-ion battery (2004)
- The electronic structure and lithiation of electrodes based on vanadium-oxide nanotubes (2003)
- Structural Transformations in Intermetallic Electrodes for Lithium Batteries (2003)
- Cycling performance and temperature stability of a tin-borate glass anode. (2003)
- Anion receptor for enhanced thermal stability of the graphite anode interface in a Li-ion battery (2003)
- Surface Chemistry of Carbon-Treated LiFePO4 Particles for Li-Ion Battery Cathodes Studied by PES (2003)
- Surface Chemistry of Carbon-Treated LiFePO4 Particles for Li-Ion Battery Cathodes Studied by PES (2003)
- The surface chemistry of carbon-treated LiFePO4 particles for Li-ion battery cathodes studied by Photoelectron Spectroscopy (2003)
- Structural Characterization of Layered LixNi0.5Mn0.5O2 (0<x¡Ü2) Oxide Electrodes for Li Batteries (2003)
- Redox behavior of vanadium oxide nanotubes as studied by X-ray photoelectron spectroscopy and soft X-ray absorption spectroscopy. (2003)
- Redox Behavior of Vanadium Oxide Nanotubes As Studied by X-ray Photoelectron Spectroscopy and Soft X-ray Absorption Spectroscopy (2003)
- The Structure and Electrocchemical Performance of Na+-,K+-, and Ca2+-Vanadium Oxide Nanotubes (2003)
- Structural considerations of intermetallic electrodes for lithium batteries (2003)
- Alternative anode materials for lithium-ion batteries: a study of Ag3Sb (2003)
- The influence of lithium salt on the interfacial reactions controlling the thermal stability of graphite anodes (2002)
- Structural Transformations in Lithiated n´-Cu 6 Sn 5 Electrodes Probed by In Situ Mössbauer Spectroscopy and X-Ray Diffraction (2002)
- Infrared and in situ 119Sn Mössbauer study of lithiated tin borate glasses (2002)
- Neutron-scattering studies on carbon anode materials used in lithium-ion batteries. (2002)
- Chemical Composition and Morphology of the Elevated Temperature SEI-layer on Graphite (2001)
- Carbon electrode morphology and thermal stability of the passivation layer. (2001)
- A furnace for in situ X-ray diffraction studies of insertion processes in electrode materials at elevated temperatures (2001)
- Influence of Carbon Black and Binder on Li-ion Batteries (2001)
- Phase transitions in lithiated Cu2Sb anodes for lithium batteries: an in situ X-ray diffraction study (2001)
- Structural investigation of the Li+ion insertion/extraction mechanism in Sn-based composite oxide glasses. (2001)
- The effect of lithium insertion on the structure of tin oxide based glasses. (2001)
- The Electrochemistry of Intermetallic Materials in Lithium Batteries (2001)
- The performance of vanadium oxide nanorolls as cathode material in a rechargeable lithium battery (2001)
- Thermal Stability of the HOPG/Liquid. Electrolyte Interphase Studied (2000)
- The magnetic structure in K+ beta-ferrite (2000)
- The crystal and magnetic structure of nonstoichiometric K+ beta-ferrite (2000)
- Electrochemistry and in situ X-ray diffraction of InSb in lithium batteries (2000)
- Characterisation of the ambient and elevated temperature performance of a graphite electrode (1999)
- Diffraction as a tool in the study of lithium insertion mechanisms (1999)
- A neutron diffraction cell for studying lithium-insertion processes in electrode materials (1998)
- In situ X-ray diffraction studies of a graphite-based Li-ion battery negative electrode (1996)
- CRYSTAL-STRUCTURE AND CHARGE COMPENSATION MECHANISMS IN A BARIUM POTASSIUM BETA-FERRITE (1995)
- ALIOVALENT IONIC SUBSTITUTION AS A PROBE OF CONDUCTION MECHANISM (1995)
- Understanding the capacity loss in LNMO-LTO lithium-ion cells at ambient and elevated temperatures
- Surface-oxidized NbO2 nanoparticles for high performance lithium microbatteries
- Emulsion-templated graphitic carbon foams with optimum porosity for 3D Li-ion microbatteries
- Electrochemical behavior of tin(IV) oxide electrodes in lithium-ion batteries at elevated temperatures
- Overlapping and Rate Controlling Electrochemical Reactions for Tin(IV) Oxide Electrodes in Lithium-Ion Batteries
- The Influence of Al2O3 and Diamond as Additives on the Performance of SnO2 Electrodes in Lithium-Ion Batteries
- Effects of Elevated Temperature and Vinylene Carbonate Additive on the Electrochemical Performance of SnO2 Nanoparticles in Lithium-Ion Batteries
- Electrolyte additives for enhanced thermal stability of the graphite anode interface in Li-ion battery
- Binder content dependence of electrochemical properties and interphase composition in Graphite:PVdF-HFP electrodes.
- Analysis of the solid-electrolyte interphase of water-processed graphite electrodes by photoelectron spectroscopy
- Conventional Additives in Unconventional Cell Chemistries: Pitfalls in Performance Evaluation of Dual-ion Batteries
- The Cathode Electrolyte Interphase on Graphite Positive Electrode in Dual-ion Batteries Probed Using X-ray Photoelectron Spectroscopy
- 3D Electrodes Fabricated from Nano-graphitic Carbon Foams with Enhanced Lithium-ion Storage
- Binder Impact on Self-Discharge in Graphite Dual-Ion Batteries
- The Influence of Electrochemical Cycling and Side Reactions on Battery Electrode Materials Analyzed by Photoelectron Spectroscopy
- Free Standing Ru-TiC Nanowire Array/Carbon Textile Cathode with Enhanced Stability for Li-O2 Batteries
- Ru/α-MnO2 nanotube catalysts for electrochemical decomposition of Li2O2 in Li-O2 batteries
- A novel HPXPS experimental method for characterization of the interface between a solid electrode and electrolyte demonstrated with a Li-ion battery system
- A Crystallographic Reinvestigation of Li1.2Mn0.6Ni0.2O2
- Highly concentrated LiTFSI - EC electrolytes for Li metal batteries
- The Effects of Binders on Interface Layer Formation on Li4Ti5O12 Electrodes
- Manganese dissolution and electrochemistry of alternative electrolytes
- Surface Layer Formation on Li4Ti5O12 Electrodes in Li-ion Cells with Propylene Carbonate-Based Electrolyte
- A Full 3D Li-ion Microbattery with Different Electrode Geometries
- On the Electrophoretic and Sol-gel Depostion of Active Materials on Aluminium Rod Current Collectors for Three-dimensional Li-ion Micro-batteries
- Polydopamine-based redox-active separator for lithium-ion batteries
- A comparative study of manganese hexacyanomanganate as a positive electrode for non-aqueous Li-, Na- and K-ion batteries
- Synthesis–Structure Relationships in Li- and Mn-rich Layered Oxides
- At the polymer electrolyte interfaces: the role of the host material for surface decomposition mechanisms in Li-polymer batteries
- The Role of LiTDI Additive in LiNi1/3Mn1/3Co1/3O2/graphite Lithium-ion Batteries at Elevated Temperatures
Chapters
Conferences
- Separators As a Tool for Enhanced Battery Performance (2019)
- P-doped Hard Carbon as Anode Material for Sodium-ion Batteries (2019)
- Non-Fluorinated Electrolytes for Si-based Li-ion Battery Anodes (2019)
- Fluoroethylene Carbonate Containing Electrolytes: Origin of Poor Shelf Life and Its Mitigation (2019)
- Fluoroethylene Carbonate Containing Electrolytes: Origin of Poor Shelf Life and Its Mitigation (2019)
- Cation Ordering and Oxygen Release in LiNi0.5-xMn1.5+xO4-y (LNMO)—In Situ Neutron Diffraction and Performance in Li-Ion Full Cells (2018)
- One-pot Synthesis of MoO3-x Nanosheets for Supercapacitor Applications (2018)
- Non-Fluorinated Electrolytes for Si-based Li-ion Battery Anodes (2018)
- Hard Carbon//Na3V2(PO4)3 Full Cell Battery Exhibiting Enhanced Performance (2018)
- Energy-tuned photoelectron spectroscopy of lithium-ion battery cathodes (2018)
- Lithium Trapping in Alloy forming Electrodes and Current Collectors for Lithium based Batteries (2018)
- Understanding the Rapid Capacity Fading of LNMO-LTO Lithium-ion Cells at Elevated Temperature (2017)
- Understanding the Capacity Loss in LiNi0.5Mn1.5O4 - Li4Ti5O12 Lithium-Ion Cells at Ambient and Elevated Temperatures (2017)
- Passivation Layer and Cathodic Redox Reactions in Sodium-Ion Batteries Probed by HAXPES (2017)
- The influence of counter electrode on the capacity fading in LiNi0.33Mn0.33Co0.33O2-based Li-ion battery cells (2017)
- The influence of counter electrode on the capacity fading in LiNi0.33Mn0.33Co0.33O2-based Li-ion battery cells (2017)
- The influence of temperature and SOC ranges of ageing in commercial LiNi0.33Mn0.33Co0.33O2/LiMn2O4-graphite commercial cells (2017)
- In Operando X-ray and Neutron Diffraction for Lithium Ion Batteries (2017)
- Silicon as negative electrode - what more can we do make it work? (2017)
- In situ Neutron Diffraction of Battery Materials (2017)
- Inorganic chemistry and energy storage for a better environment (2017)
- THE SEI REVISITED – WHAT DO WE KNOW ABOUT INTERFACES AND INTERPHASES? (2017)
- Batteries for Energy Storage (2017)
- Probing the origins of electrochemical properties in electrodes for lithium ion batteries through in operando diffraction (2017)
- Interfaces and Interphases in Li- and Na- batteries (2017)
- Reach MAX (2017)
- Electrode/electrolyte interfaces in lithium and sodium batteries (2017)
- Sodium batteries and their interfaces (2017)
- Simple and Green Method for Fabricating V2O5·nH2O Nanosheets for Lithium Battery Application (2017)
- Simple and Green Method for Fabricating V2O5·nH2O Nanosheets for Lithium Battery Application (2017)
- CaS- and MgS-assisted graphitization of porous carbons for energy storage applications (2017)
- Cladophora cellulose based separators for lithium-ion batteries (2017)
- Lithium trapping in alloy forming electrodes and current collectors for lithium based batteries (2017)
- Towards more environmentally friendly iron-based Li-ion batteries (2017)
- LIBchallenge (2017)
- Electrochemical behaviour of tin(IV) oxide electrodes in lithium-ion batteries at high temperature and potentials (2016)
- Mixed valence niobium oxides for high power 3D microbattery applications (2016)
- Role of iron in Na1.5Fe0.5Ti1.5(PO4)(3)/C as electrode material for Na-ion batteries studied by operando Mossbauer spectroscopy (2016)
- Interfaces and interphases in battery materials probed by PES and soft X-ray techniques (2016)
- Development of freestanding electrodes for Li-ion anodes (2016)
- Silicon anodes and electrolyte interactions (2016)
- Development of high-energy Li-S batteries based on commercial materials and water-soluble functional binders (2016)
- Electrode Based on Oxyphosphates as Anode Materials for High Energy Density Lithium-ion Batteries (2016)
- Electrochemical manufacturing and characterisation of nanostructured electrodes for lithium-ion batteries (2016)
- Improved cycling stability of conversion and alloying anodes through the use of nanomaterials (2016)
- Paper based flexible Si anodes for lithium ion batteries (2016)
- Free-Standing Oxide Nanotube Array Electrodes for High Energy Density and Power Density Li-Ion Batteries (2016)
- Anodic TiO2 Nanotube Array Electrodes for High Energy Density and Power Density Li-ion and Na-ion Battery Applications (2016)
- Electrochemical behavior of tin(IV) oxide electrodes in lithium-ion batteries at high potentials (2015)
- Electrochemical behaviour of tin(IV) oxide electrodes in lithium-ion batteries at high potentials (2015)
- Burried Interfaces in Anode Materials for Li-Ion Batteries- Can they influence EVs? (2015)
- Anodes for lithium and sodium batteries – and their challenging interfaces (2015)
- Understanding Battery Interfaces (2015)
- HAXPES and HPPES – some examples of interfacial reactions in Li-based batteries (2015)
- Light on battery materials for light (2015)
- Recent progress in high pressure analyser and experimental method development applied to liquid/solid interface studies (2015)
- Flash, Size Tunable Synthesis of SnO2 Nanocrystals Encapsulated in 3d Macroporous Carbon and Its Pseudocapacitive Contribution to High Performance Li+ Storage (2015)
- Detailed "mapping" of internal resistance in Li-S batteries (2015)
- Self-discharge and cycling stability in the Li-S battery (2015)
- Aluminium rods as current collectors and electrodes for 3D Li-ion micro-batteries (2015)
- Cladophora Cellulose Membranes as Promising Lithium-Ion Battery Separators (2015)
- Electrochemical fabrication of 3D Cu/Cu2O multilayered nanostructures (2015)
- Paper-Based Flexible Si anodes for Lithium-Ion Batteries (2015)
- Binder-free oxide nanotube array electrodes for high energy density and power density Li-ion batteries (2015)
- nterfaces in batteries - combination of soft and hard X-rays to depth profile the SEI on different negative electrodes in Li- and Na-based batteries (2014)
- Structures in Motion - in situ Studies of Future Battery Concepts Crystallography – Bridging materials and molecules in modern chemistry (2014)
- Eco-Friendly Nano-materials for Li- and Na-ion Batteries”, International conference on functional materials: nano and composite functional materials (2014)
- Anodes for lithium-based batteries – how difficult could this be? (2014)
- Hunting Down Eco-Friendly Materials for Li- and Na-ion Batteries (2014)
- Depth profiling through electrode/electrolyte interfaces (2014)
- Silicon and its interfacial reactions. (2014)
- Functional water-soluble binders for improved capacity and stability of Li-S batteries (2014)
- Functional, water-soluble binders for improved capacity and stability of lithium-sulfur batteries (2014)
- Choosing the cathode binder: how much difference can it make? (2014)
- A study of the anode in the lithium-sulfur system and its influence on cycle life (2014)
- Polycarbonate-based Solid Polymer Electrolytes for Li-ion Batteries (2014)
- The polymer electrolyte SEI-layer: a comparative XPS study of the surface chemistry in solid-state Li-batteries (2014)
- Inorganic and organometallic materials for novel Li-ion batteries (2013)
- Studying the role of the anode in the cycle life performance of Li-S batteries (2013)
- Superior capacity, rate capability and stability with a water-soluble PEO:PVP binder (2013)
- Capacity-enhancing polymers for Li-S battery cathodes (2013)
- Electropolymerized Solid Polymer Electrolytes for Three-dimensional Microbatteries (2013)
- Degradation Products on Li-Negative Electrode and the Carbon Cathode in Li-O2 Batteries (2012)
- The Role of Carbon in the Cathode of a Li-O2 Battery (2010)
- Life-Time Studies of Li-Ion Batteries for HEV Applications (2009)
- Energy Storage Activities in the Swedish Hybrid Vehicle Centre (2009)
- In situ diffraction studies of LiFePO4 under fast discharge (2009)
- Dynamic Reduction of Crystallinity in LiFePO4 during Fast Cycling (2009)
- Non-destructive depth-profiling of the SEI on different anode and cathode materials for Li-ion batteries (2009)
- Depth Profiling of the SEI on LiFePO4 and LiMnPO4 (2009)
- Electrodes Nano-Structures pour les Micro-Batteries Li-Ion Tredimensionelles (2009)
- Comparison between the structural and thermal stabilities of LiNi0.7Co0.3 and LiNi0.65Co0.25Mn0.1O2 positive electrode materials (2009)
- Effect of the Carbon Coating on the Electrochemical Properties of Li0.5Ni0.25TiOPO4 Phosphates (2009)
- Comparison of morphology, particle size and pretreatment effects on cycling performance of Si-based anodes for Li-ion batteries (2009)
- The Primary Nonaqueous Lithium-Air Battery (2009)
- Nanostructure Electrodes for 3D Li-ion Microbatteries (2008)
- Micro-structure of Intermetallic Electrodes for Li-ion Batteries (2008)
- Electrochemical Deposition of Metal/Metal Oxide Nanomaterials based on Induced Local pH Variations (2008)
- Cu2Sb as anode material integrated into nano-structured Cu current collectors (2008)
- Growth of Aluminium Current Collectors for 3-Dimensional Microbattery Applications (2008)
- Lithium oxygen batteries (2008)
- Rietveld refinement of the X-Ray Diffraction pattern of LiNi0.65Co0.25Mn0.10O2 layered oxide (2007)
- Li-ion batteries for energy storage, power applications and a better environment (2007)
- Antimony-containing anodes for Li-ion batteries – their reactivity and structure (2007)
- Antimony anodes for Li-ion batteries – the rôle of nanosized particles (2007)
- Growth of nanostructured current collectors in “in-house-synthesised” ordered nanoporous alumina membranes for 3D micro-batteries (2007)
- Positive Electrode Materials Based On Moroccan Mineral Resources (Co, Mn, Ni) : Structural And Electrochemical Properties (2007)
- The Influence on the SEI of Different Cell Designs (2006)
- Electrodeposited Nano-sized Thin Films of Sb and Sb2O3 as Anode Materials in Li-ion Batteries (2006)
- The role of the Oxide in Electrodeposited Nano-sized Thin Films of Sb (2006)
- Characterisation of the SEI formed on Graphite using Synchrotron PES (2005)
- The Structural Response of Vanadium Oxide Nanotubes: an In Situ XRD Study (2005)
- Vanadium-oxide nanotubes - electrochemistry and structure (2000)
Reports
- A bibliometric analysis of battery research with the BATTERY 2030+ roadmap as point of departure (2022)
- ROADMAP ON NEW AND EMERGING TECHNOLOGIES (2021)
- Development of reporting methodologies - Batteries Europe (2021)
- Battery 2030+ Roadmap (2020)
Other
- In Operando X-ray and Neutron Diffraction for Lithium Ion Batteries (2017)
- En stjärna på kemisternas himmel (2017)
- Towards an Understanding of Li2O2 Evolution in Li–O2Batteries: An In Operando Synchrotron X-ray DiffractionStudy (2017)
- Free Standing Ru-TiC Nanowire Array/Carbon Textile Cathode with Enhanced Stability for Li-O2 Batteries (2017)
- Research and life for a Swedish family in Tsukuba Science City (2001)
