Ulf Jansson
Professor i oorganisk kemi vid Institutionen för kemi - Ångström; Oorganisk kemi
- Telefon:
- 018-471 37 08
- Fax:
- 018-51 35 48
- E-post:
- Ulf.Jansson@kemi.uu.se
- Besöksadress:
- Lägerhyddsvägen 1
- Postadress:
- Box 538
751 21 Uppsala
Ladda ned kontaktuppgifter för Ulf Jansson vid Institutionen för kemi - Ångström; Oorganisk kemi
- Akademiska meriter:
- FD, Docent
Mer information visas för dig som medarbetare om du loggar in.
Biografi
Min forskning är inriktad på syntes och karakterisering av tunnfilmsmaterial för olika tillämpningar. Jag arbetar framförallt med kolbaserade föreningar som karbider och grafen, men även borider och oxider. En viktig del av forskningen är att designa multifunktionella material med en skräddarsydd mikrostruktur. Exempel är nanokompositer, amorfa skikt samt multilagerstrukturer med en unik kombination av mekaniska, tribologiska och elektriska egenskaper.
Publikationer
Senaste publikationer
- Elemental distribution and fracture properties of magnetron sputtered carbon supersaturated tungsten films (2024)
- Crack reduction in laser powder bed fusion of MnAl(C) using graphene oxide coated powders (2024)
- Convective Flow Redistribution of Oxygen by Laser Melting of a Zr-Based Amorphous Alloy (2023)
- Reactive metal additive manufacturing (2023)
- Magnetron sputtering of the high entropy alloy CoCrFeMnNi on 316L (2023)
Alla publikationer
Artiklar
- Elemental distribution and fracture properties of magnetron sputtered carbon supersaturated tungsten films (2024)
- Crack reduction in laser powder bed fusion of MnAl(C) using graphene oxide coated powders (2024)
- Convective Flow Redistribution of Oxygen by Laser Melting of a Zr-Based Amorphous Alloy (2023)
- Reactive metal additive manufacturing (2023)
- Magnetron sputtering of the high entropy alloy CoCrFeMnNi on 316L (2023)
- Additive Manufacturing of Cu Using Graphene-Oxide-Treated Powder (2023)
- From high-entropy alloys to high-entropy ceramics (2023)
- Magnetron sputtered high entropy alloy/amorphous carbon nanocomposite coatings (2023)
- Precipitation Kinetics During Post-heat Treatment of an Additively Manufactured Ferritic Stainless Steel (2022)
- Structure and Phase Transformations in Gas Atomized AlCoCrFeNi High Entropy Alloy Powders (2022)
- Tetragonal distortion in magnetron sputtered bcc-W films with supersaturated carbon (2022)
- Investigation of the phase formation in magnetron sputtered hard multicomponent (HfNbTiVZr)C coatings (2022)
- Corrosion studies on multicomponent CoCrFeMnNi(C) thin films in acidic environments (2022)
- Synthesis of graphene oxide coated metal powders with improved flowability and reduced reflectance (2022)
- Experimental and theoretical evidence of charge transfer in multi-component alloys (2021)
- Magnetron sputtering of carbon supersaturated tungsten films-A chemical approach to increase strength (2021)
- Synthesis and characterisation of nanocomposite Mo-Fe-B thin films deposited by magnetron sputtering (2021)
- Enhancing corrosion resistance, hardness, and crack resistance in magnetron sputtered high entropy CoCrFeMnNi coatings by adding carbon (2021)
- Magnetron Sputtering of Nanolaminated Cr2AlB2 (2020)
- Interstitial carbon in bcc HfNbTiVZr high-entropy alloy from first principles (2020)
- Influence of Carbon on Microstructure and Mechanical Properties of Magnetron Sputtered TaW Coatings (2020)
- Additive manufacturing of the ferritic stainless steel SS441 (2020)
- Development of process parameters for selective laser melting of a Zr-based bulk metallic glass (2020)
- The effect of laser scanning strategies on texture, mechanical properties, and site-specific grain orientation in selective laser melted 316L SS (2020)
- Phase formation in magnetron sputtered CrMnFeCoNi high entropy alloy (2020)
- Thermal stability and crystallization of a Zr-based metallic glass produced by suction casting and selective laser melting (2020)
- Achieving low elastic moduli of bcc Ti-V alloys in vicinity of mechanical instability (2020)
- Magnetic and mechanical effects of Mn substitutions in AlFe2B2 (2019)
- Influence of Deposition Temperature on the Phase Evolution of HfNbTiVZr High-Entropy Thin Films (2019)
- Carbon-containing multi-component thin films (2019)
- Binder jetting of the AlCoCrFeNi alloy (2019)
- Elemental segregation in an AlCoCrFeNi high-entropy alloy (2019)
- Microstructure and phase composition of the Ag-Al film wear track (2019)
- Synthesis and characterization of (Ti1-xAlx)B2+Delta thin films from combinatorial magnetron sputtering (2019)
- Accurate high-resolution depth profiling of magnetron sputtered transition metal alloy films containing light species (2019)
- Thermal Stability of the HfNbTiVZr High-Entropy Alloy (2019)
- Elemental Distribution in CrNbTaTiW-C High Entropy Alloy Thin Films (2019)
- On the electro-tribological properties and degradation resistance of silver-aluminum coatings (2018)
- Hard and crack resistant carbon supersaturated refractory nanostructured multicomponent coatings (2018)
- On Surface Losses in Direct Metal Laser Sintering Printed Millimeter and Submillimeter Waveguides (2018)
- Structure and Hydrogenation Properties of a HfNbTiVZr High-Entropy Alloy (2018)
- Synthesis and characterization of multicomponent (CrNbTaTiW)C films for increased hardness and corrosion resistance (2018)
- The Influence of Chemical and Phase Composition on Mechanical, Tribological and Electrical Properties of Silver-Aluminum alloys (2018)
- Tuning tribological, mechanical and electrical properties of Ag-X (X=Al, In, Sn) alloys (2018)
- Minimizing sputter-induced damage during deposition of WS2 onto graphene (2017)
- AlM2B2 (M =Cr, Mn, Fe, Co, Ni) (2017)
- Synthesis and characterisation of Mo-B-C thin films deposited by non-reactive DC magnetron sputtering (2017)
- Age hardening in (Ti1-xAlx)B2+Delta thin films (2017)
- Passive films on nanocomposite carbide coatings for electrical contact applications (2017)
- The influence of nanoeffects on the oxidation of magnetron sputtered Cr-C/Ag thin films containing silver nanoparticles (2017)
- Optical methods to quantify amorphous carbon in carbide-based nanocomposite coatings (2017)
- Defect formation in graphene during low-energy ion bombardment (2016)
- Toward synthesis of oxide films on graphene with sputtering based processes (2016)
- Synthesis and characterization of MoB2-x thin films grown by nonreactive DC magnetron sputtering (2016)
- Combinatorial magnetron sputtering of AgFeO2 thin films with the delafossite structure (2016)
- Combinatorial Study of Gradient Ag-Al Thin Films (2016)
- Superior hydrogen storage in high entropy alloys (2016)
- An APT investigation of an amorphous Cr-B-C thin film (2015)
- Influence of boron vacancies on phase stability, bonding and structure of MB2 (M = Ti, Zr, Hf, V, Nb, Ta, Cr, Mo, W) with AlB2 type structure (2015)
- Structure and properties of Cr-C/Ag films deposited by magnetron sputtering (2015)
- Structure and bonding in amorphous iron carbide thin films (2015)
- Ti-Ni-C nanocomposite coatings evaluated in a sliding electrical contact application (2015)
- Amorphous W-S-N thin films: The atomic structure behind ultra-low friction (2015)
- Amorphous W-S-N thin films: the atomic structure behind ultra-low friction (2015)
- Graphene as a lubricant on Ag for electrical contact applications (2015)
- Characterization of amorphous Zr-Si-C thin films deposited by DC magnetron sputtering (2015)
- Characterization of magnetron sputtered Cr-B and Cr-B-C thin films for electrical contact applications (2015)
- A near-wearless and extremely long lifetime amorphous carbon film under high vacuum (2015)
- Crystallization characteristics and chemical bonding properties of nickel carbide thin film nanocomposites (2014)
- On the evaluation of corrosion resistances of amorphous chromium carbide thin-films (2014)
- Formation of 2D transition metal dichalcogenides on TiC1-xAx surfaces (A=S, Se, Te) (2014)
- Reactive sputtering of NbCx-based nanocomposite coatings (2014)
- Suberhard NbB2-x thin films deposited by dc magnetron sputtering (2014)
- Nb-B-C thin films for electrical contact applications deposited by magnetron sputtering (2014)
- Reactive sputtering of NbCx-based nanocomposite coatings (2014)
- Superhard NbB2-x thin films deposited by dc magnetron sputtering (2014)
- Tribochemical formation of sulphide tribofilms from a Ti-C-S coating sliding against different counter surfaces (2014)
- Influence of deposition temperature and amorphous carbon on microstructure and oxidation resistance of magnetron sputtered nanocomposite Cr-C films (2014)
- Growth and characterization of chromium carbide films deposited by high rate reactive magnetron sputtering for electrical contact applications (2014)
- Understanding the effects of sputter damage in W–S thin films by HAXPES (2014)
- Influence of composition, structure and testing atmosphere on the tribological performance of W-S-N coatings (2014)
- Mechanisms for compositional variations of coatings sputtered from a WS2 target (2014)
- Incorporation effects of Si in TiCx thin films (2014)
- Model for electron-beam-induced crystallization of amorphous Me-Si-C (Me = Nb or Zr) thin films (2014)
- Structure and electrical properties of Nb-Ge-C nanocomposite coatings (2014)
- Control of crystallinity in sputtered Cr-Ti-C films (2013)
- Sputter deposition of transition-metal carbide films - A critical review from a chemical perspective (2013)
- Deposition and characterization of reactive magnetron sputtered zirconium carbide films (2013)
- Characterization of amorphous and nanocomposite Nb-Si-C thin films deposited by DC magnetron sputtering (2013)
- Solution-based synthesis of AgI coatings for low-friction applications (2013)
- Influence of Ti addition on the structure and properties of low-friction W–S–C coatings (2013)
- Tribochemically Active Ti–C–S Nanocomposite Coatings (2013)
- Beam-induced crystallization of amorphous Me-Si-C (Me = Nb or Zr) thin films during transmission electron microscopy (2013)
- Deposition and characterization of magnetron sputtered amorphous Cr-C films (2012)
- Magnetron sputtering of Zr-Si-C thin films (2012)
- Discovery of the Ternary Nanolaminated Compound Nb2GeC by a Systematic Theoretical-Experimental Approach (2012)
- Structural properties of amorphous metal carbides (2012)
- Effects of A-elements (A=Si, Ge or Sn) on the structure and electrical contact properties of Ti-A-C-Ag nanocomposites (2012)
- Ti-B-C nanocomposite coatings deposited by magnetron sputtering (2012)
- Electronic structure and chemical bonding of amorphous chromium carbide thin films (2012)
- Growth of Ti-C nanocomposite films by reactive high power impulse magnetron sputtering under industrial conditions (2012)
- Contact Resistance of Ti-Si-C-Ag and Ti-Si-C-Ag-Pd Nanocomposite Coatings (2012)
- Friction and contact resistance of nanocomposite Ti-Ni-C coatings (2011)
- An In-Situ Prepared Nano-Manipulator Tip for Electrical Characterization of Free Standing Graphene Like Sheets Inside a Focused Ion Beam/Scanning Electron Microscope (2011)
- Functionalization and Area-Selective Deposition of Magnetic Carbon-Coated Iron Nanoparticles from Solution (2011)
- Design of carbide-based nanocomposite thin films by selective alloying (2011)
- Structural, mechanical and electrical-contact properties of nanocrystalline-NbC/amorphous-C coatings deposited by magnetron sputtering (2011)
- Transfer of carbon nanosheet films to nongrowth, zero thermal budget substrates (2011)
- Carbon Release by Selective Alloying of Transition Metal Carbides (2011)
- Stirring-induced aggregation of graphene in suspension (2011)
- Wear-resistant magnetic thin film material based on a Ti1−xFexC1−y nanocomposite alloy (2010)
- The Mn + 1AXn phases (2010)
- Conductivity engineering of graphene by defect formation (2010)
- Microstructure evolution of Ti-Si-C-Ag nanocomposite coatings deposited by DC magnetron sputtering (2010)
- High-rate deposition of amorphous and nanocomposite Ti-Si-C multifunctional coatings (2010)
- Deposition of Ti-Si-C-Ag Nanocomposite Coatings as Electrical Contact Material (2010)
- Synthesis, structure and properties of Ni-alloyed TiCx-based thin films (2010)
- Carbide and nanocomposite thin films in the Ti-Pt-C system (2010)
- Design of the Lattice Parameter of Embedded Nanoparticles (2010)
- Deposition and characterization of magnetic Ti–Fe–C nanocomposite thin films (2010)
- Conductive nanocomposite ceramics as tribological and electrical contact materials (2010)
- Influence of sputter damage on the XPS analysis of metastable nanocomposite coatings (2009)
- Industrialisation Study of Nanocomposite nc-TiC/a-C Coatings for Electrical Contact Applications (2009)
- Tribofilm formation and tribological properties of TiC and nanocomposite TiAlC coatings (2009)
- Tribofilm formation from TiC and nanocomposite TiAlC coatings, studied with Focused Ion Beam and Transmission Electron Microscopy (2009)
- Electronic structure and chemical bonding of nanocrystalline-TiC/amorphous-C nanocomposites (2009)
- Atomic layer deposition of titanium dioxide nanostructures using carbon nanosheets as a template (2009)
- Molecular adsorption in defected graphene with divacancy defects (2009)
- Mild sonochemical exfoliation of bromine-intercalated graphite a new route towards graphene (2009)
- Defect Formation In Graphene Nanosheets By Acid Treatment (2008)
- On the origin of a third spectral component of C1s XPS-spectra for nc-TiC/a-C nanocomposite thin films (2008)
- Anisotropy in the electronic structure of V2GeC investigated by soft x-ray emission spectroscopy and first-principles theory (2008)
- Synthesis of Nanostructed Tungsten Oxide Thin Films (2008)
- Structural, electrical and mechanical characterization of magnetron-sputtered (2008)
- Thermal stability of Ti3SiC2 thin films (2007)
- HIKE experiments at KMC-1: Recent Analysis of Thin Film Nanocomposites (2007)
- Selected area deposition of multiwalled carbon nanotubes from solution (2007)
- Intrusion-type deformation in epitaxial Ti3SiC2/TiC0.67 nanolaminates (2007)
- Design of Nanocomposite Low-Friction Coatings (2007)
- High-power impulse magnetron sputtering of Ti–Si–C thin films from a Ti3SiC2 compound target (2006)
- General trend of the mechanical properties of the ternary carbides M3SiC2 (M=transition metal) (2006)
- Growth and Property Characterization of Epitaxial MAX-Phase Thin Films from the Tin+1(Si, Ge, Sn)Cn Systems (2006)
- Nanocomposite nc-TiC/a-C thin films for electrical contact applications (2006)
- Electronic structure and chemical bonding in Ti4SiC3 investigated by soft x-ray emission spectroscopy and first-principles theory (2006)
- Electronic structure and chemical bonding in Ti2AlC investigated by soft x-ray emission spectroscopy (2006)
- Structural, electrical, and mechanical properties of nc-TiC/a-SiC nanocomposite thin films (2005)
- Surface segregation of transition metal impurities on the TiC(100) Surface (2005)
- Growth and characterization of MAX-phase thin films (2005)
- Fabrication of High-Aspect-Ratio Prussian Blue Nanotubes Using a Porous Alumina Template (2005)
- Growth of Ti3SiC2 thin films by elemental target magnetron sputtering (2004)
- Layered compound Nb3SiC2 predicted from first-principles theory (2004)
- Surface energies and work functions of the transition metal carbides (2004)
- A new compound reduces contact wear (2004)
- Deposition of Ti2AIC and Ti3AIC2 epitaxial films by magnetron sputtering (2004)
- Electrochemically lithiated graphite characterised by photoelectron spectroscopy (2003)
- Kink formation around indents in laminated Ti3SiC2 thin films studied in the nanoscale (2003)
- Magnetron sputtered W-C films with C60 as carbon source (2003)
- Epitaxial growth of tungsten carbide films using C60 as carbon precursor (2003)
- A comparative Raman study of some transition metal fullerides (2003)
- Low resistivity ohmic contacts on 4H-silicon carbide for high power and high temperature device applications (2002)
- Deposition of epitaxial ternary transition metal carbide films (2002)
- Magnetron sputtered epitaxial single-phase Ti3SiC2 thin films (2002)
- High pressure Raman study of C60S16 (2002)
- Pressure-induced polymerization of C-60 at high temperatures: An in situ Raman study (2002)
- In situ Raman study of C-60 polymerization at high pressure high temperature conditions (2002)
- In situ X-ray diffraction study of C-60 polymerization at high pressure and temperature (2002)
- Deposition and characterization of NbxC60 films (2002)
- Comparative raman study of the Ti complex Cp2Ti(eta(2)-C-60) center dot C6H5CH3 and TixC60 films (2002)
- Phase stabilities and homogeneity ranges in 4d-transition-metal carbides: A theoretical study - art. no. 134108 (2001)
- Phase stability diagrams of transition metal carbides, a theoretical study (2001)
- Phase stabilities and structural relaxations in substoichiometric TiC1-x (2001)
- Deposition of Epitaxial Transition Metal Films and Superlattices by DC Magnetron Sputtering and C60 Evaporation (2001)
- Growth, structure and mechanical properties of transition metal carbide superlattices (2001)
- Low-temperature epitaxial growth of metal carbides using fullerenes (2001)
- Study of oxygen-C compound formation by NEXAFS and RIXS (2001)
- Chemical vapour deposition of molybdenum carbides: aspects of nanocrystallinity (2001)
- Bonding mechanism in the transition-metal fullerides studied by symmetry-selective resonant x-ray inelastic scattering (2001)
- In situ Raman study of C-60 thin films at high pressures - art. no. 113408 (2001)
- Superhard and superelastic films of polymeric C-60 (2001)
- Strain relaxation in low-temperature deposited epitaxial titanium carbide films (2000)
- Deposition of transition metal carbides and superlattices using C-60 as carbon source (2000)
- Electrical characterization of TiC ohmic contacts to aluminum ion implanted 4H-silicon carbide (2000)
- Low resistivity ohmic titanium carbide contacts to n- and p-type 4H-silicon carbide (2000)
- Chemical vapour deposition of molybdenum carbides: aspects of phase stability (2000)
- CVD-based tungsten carbide Schottky contacts to 6H-SiC for very high-temperature operation (2000)
- Phase transitions and relaxation dynamics in C70S48 polar crystals and films (2000)
- C-60 and C-70 solvates studied by Raman spectroscopy (2000)
- Single-crystal growth of C70S8 - a new phase in the C-70-sulphur system (2000)
- Theory of phase stabilities and bonding mechanisms in stoichiometric and substoichiometric molybdenum carbide (1999)
- Theoretical studies of substitutional impurities in molybdenum carbide (1999)
- Deposition of epitaxial titanium carbide films on MgO(001) and 6H-SiC(0001) by coevaporation of Ti and C-60 (1999)
- Formation of titanium fulleride studied by x-ray spectroscopies (1999)
- Chemical vapour deposition of epitaxial WO3 films (1999)
- Atomic layer epitaxy of tungsten oxide films using oxyfluorides as metal precursors (1999)
- Preparation and characterization of C60S16 and C70S48 thin films (1999)
- Deposition of transition metal carbide superlattices using C-60 as a carbon source (1998)
- On the Existence of Transition-Metal Fullerides: Deposition and Characterization of TixC60 (1998)
- Use of oxygen-stabilized C60 films for selective chemical vapor deposition (1997)
- Chemical vapour deposition of molybdenum carbides using C60 as a carbon source (1997)
- Chemical vapour deposition of tungsten carbides on tantalum and nickel substrates (1996)
- INITIAL-STAGES OF GROWTH DURING CVD OF W ON TISI2 SUBSTRATES (1995)
- Improved Direct Bonding of Si- and SiO2 surfaces by Cleaning in H2SO4:H2O2:HF (1995)
- LOW-PRESSURE CVD OF TUNGSTEN CARBIDES (1995)
- Sequential nitriding depth profiles in titanium, obtained under reactive additive manufacturing conditions
- Structural and mechanical properties of magnetron sputtered (NbxMo1-x)C thin films
- Elemental distribution in carbon-supersaturated high entropy alloycoatings: A synchrotron-based study
- Extending the passive region of CrFeNi-based high entropy alloys by including Ta or W
- High entropy alloy/carbon nanocomposites: Influence of carbon on the mechanical properties and corrosion resistance
Kapitel
Konferenser
- Direct metal laser sintering printed millimeter and submillimeter waveguides (2018)
- Synthesis and characterization of HfNbTiVZr high entropy alloy thin films (2017)
- Tribochemically active Ti-C-S nanocomposites – a new concept for self-lubricating coatings (2013)
- Tribochemically active Ti-C-S coatings (2013)
- Sulfur-doping of nc-TiC/a-C films by reactive sputtering (2012)
- Mechanisms responsible for compositional variations of films sputtered from a WS2 target (2012)
- Conduction properties of graphene as a function of ion irradiation and acid treatment (2011)
- Quaternary W-S-C-Ti films for tribological applications (2011)
- Visualization of functionalization of nano-particles and graphene in the TEM (2010)
- Electrical characterization of defect induced graphene nanosheets (2009)
- The effect of induced vacancy defects on resistivity of graphene (2009)
- Influence of sputter damage on the XPS analysis of metastable nanocomposite coatings (2009)
- In-situ contacting of nanosheets and remote EMCD (2009)
- Sonochemical exfoliation of bromine-graphite (2009)
- Fabrication of graphene by sonochemical exfoliation of bromine-graphite (2009)
- Fabrication of graphene by bromine-intercalation and sonochemical exfoliation (2009)
- Tribological testing of ceramic coatings boosted for low friction and for use in electrical contacts (2008)
- Control of Conductivity in Graphene by Formation of Defects (2008)
- Conductivity engineering of graphene and carbon nanosheets by defect formation (2008)
- Control of Conductivity in Graphene by Formation of Defects (2008)
- Industrialisation study of nanocomposite coatings for electrical contact applications (2008)
- Microstructural design of ternary nc-TiC/a-C based nanocomposite coatings through alloying with a second metallic element (2008)
- Intercalation and Ultrasonic Treatment of Graphite (2008)
- Conductive nanocomposite ceramics as tribological and electrical contact materials (2008)
- Design of sputtered nc-MeC/a-C nanocomposite coatings through doping with a second metallic element (2007)
- Concept of designing sputtered low-friction nanocomposite coatings through doping (2007)
- Design of sputtered nc-MeC/a-C nanocomposite coatings through doping with a second metallic element (2007)
- Tribofilm formation and tribological properties of nanocomposite TiC and TiAlC coatings (2007)
- Growth and characterization of epitaxial MAX-phase thin films from the Tin+1(Si,Ge,Sn)Cn systems (2006)
- In situ Raman study of C60 thin films at high pressures (2001)
- Comparative study by Raman spectroscopy of the Ti-complex Cp2(eta2-C60)C6H5CH3 and TixC60 films (2001)
- The formation and characterization of epitaxial titanium carbide contacts to 4H-SiC (2000)
Patent
- A contact element and a contact arrangement (2014)
- A contact element and a contact arrangement (2013)
- A contact element and a contact arrangement (2012)
- A contact element and a contact arrangement (2011)
- A contact element and a contact arrangement (2010)
- A contact element and a contact arrangement (2010)
- A Contact Element and a Contact Arrangement (2007)
- Method of Synthesising a Compound of the Formula Mn+1AXn, Film of the Compound and Its Use (2003)
